Automatic door microwave sensor
This product is an automatic door microwave non-contact sensor, which needs to be installed horizontally and firmly on the transom of the automatic door
Classification:
Gated access control
Product model:
E9
Product Description
Product Introduction
Note:Please read this manual carefully before use, so that the sensor can work better.
■ Do not install the sensor at a height of more than 4 meters, otherwise children may not be detected due to insufficient sensitivity;
■ Make sure that the detection range of the sensor is greater than the width of the channel. If the width of the detection range is narrower than that of the passage, the entry and exit of personnel may sometimes be clamped. At this time, multiple sensors should be installed to cover the entire passage;
■ This product is an automatic door microwave non-contact sensor, which needs to be installed horizontally and firmly on the horizontal frame of the automatic door;
■ Actual detection effect: Because the sensor can only sense moving objects, if the measured object is stationary for more than the delay time (about 1.5 seconds), it may happen that the measured object will not be detected even in the sensing area; In addition, the sensing target entering the sensing area will have different sensing distances due to different action intensity, different conductivity, different individual sizes and other factors.
Technical performance
|
emission frequency density |
Less than 5m W/cm2 |
|
Transmitting frequency |
24.125 GHz |
|
Maximum installation height |
Below 4 meters |
|
Power supply voltage |
AC&DC 12V-24V |
|
Tilt angle adjustable |
00 to 900 |
|
Power consumption |
Less than 1W(VA) |
|
Detection range (when the installation height is 2.2 meters) |
4m (width) * 2m (depth) |
|
Temperature range |
-20°C to 55°C |
|
Output hold time |
1.5s |
|
IP protection level
|
IP54
|
Online Message
If you are interested in our products, please leave your email and we will contact you as soon as possible, thank you!