-
TK-118F foot sensor switch
Safety light is widely used in the safety of automatic doors anti-pinch (people or things) auxiliary function, through people or things to provide automatic doors to open the door signal, so as to avoid the automatic door clamping people and objects of safety hazards. Using color corresponding plug-in socket, wiring is simple, convenient and accurate. Single beam light, double beam light optional, flexible distance selection. There are pairs of transmitting and receiving optical eye head and main controller, the emission distance is far, and the optical eye installation and wiring are flexible and convenient. The unique high-precision calculation mode and the sunlight filter factor greatly improve the anti-interference performance of the system.
Classification：
Gated access control
Product model：
TK-118F
Product Description
overall trait
• The use of color corresponding plug-in socket, wiring is simple, convenient and accurate.
• Adopt microcomputer control, international exquisite brushed stainless steel shape design.
The front is concealed with fixing screws, and the embedded fine light eye head is small. Easy installation, stable performance, strong anti-interference ability.
• Applied to the hospital operating room, laboratory and the clean room entrance automatic door induction control.
• Microprocessor modulation and demodulation of active active infrared.
• Detection mode: Foot appears, the beam is truncated, triggering an open door signal.
Main technical parameters
| Technical measures: active active infrared modulation and demodulation of microprocessor | Ambient temperature: -20 ℃ ~ 55 ℃ |
| recommend installation height: the center is 0.3 meters above the ground, single type and double type can be selected. | Anti-interference: sunlight 81000LUX white light 36000LUX |
| Beam half angle: 5 degrees | Electronic microwave: 89/336/CE standard |
| Detection mode: the sole of the foot appears, the beam is truncated, triggering a door opening signal | Appearance size: 109.5(L)x54.3(W)x28.5(D)mm (main controller) 15.5(∅)x18(H)mm (optical head),186(L)x175(W)x53(D)mm (main shell) |
| Response time: relay output ≤ 45ms | |
| Power input: AC/DC 12~30V | Hole size (mm):120(L)x100(W)x50(D)(main shell) 13(∅)x19(D)mm (bald head) |
| Power consumption of the whole machine: 82mA monitoring signal: 4.5S MA | |
| Signal indication: when the firing control is effective, the red light is always on, and the green light flashes when the beam is cut off. | Signal output: the relay normally open and normally closed can be selected |
Online Message
If you are interested in our products, please leave your email and we will contact you as soon as possible, thank you!
NANJING DUBLE MICROWAVE TECHNOLOGY CO., LTD
Advisory Hotline
Mobile: +86 18094201187
Address: 391 Tianyuan East Road, Science Park, Jiangning District, Nanjing City, Jiangsu Province
Factory address: Building 22, Phase 2, Liandong U Valley, No.9 Tonglian Road, Jiangning High-tech Zone, Nanjing
Electronic intelligent lock platform
Copyright 2024 Nanjing Dübler Microwave Technology Co., Ltd. Powered by: 300.cn SEO